Measurements you need
Tape horizontally across the most prominent points of the bust, at the back — slightly above the shoulder blades, under the arms. In your usual underwear, not pulled tight.Tape horizontally across the most prominent points of the bust, at the back — slightly above the shoulder blades, under the arms. In your usual underwear, not pulled tight.
Usually 31½–51⅛ in.Usually 80–130 cm.Tape horizontal around the fullest part of your buttocks, allowing for the curve of your stomach. Stand straight, feet together.Tape horizontal around the fullest part of your buttocks, allowing for the curve of your stomach. Stand straight, feet together.
Usually 33⅛–51⅛ in.Usually 84–130 cm.Tilt your head: a prominent vertebra can be felt at the base of the neck at the back. Tape from it down along the spine to the waist tape.Tilt your head: a prominent vertebra can be felt at the base of the neck at the back. Tape from it down along the spine to the waist tape.
Usually 14⅝–17⅜ in.Usually 37–44 cm.At the side from the waistline down to the desired hem. For a knee-length skirt — about 23⅝ in, for pants — to the floor or to the ankle bone.At the side from the waistline down to the desired hem. For a knee-length skirt — about 60 cm, for pants — to the floor or to the ankle bone.
Skirt 15¾–39⅜ in, pants 35⅜–43¼ in, shorts 11¾–21⅝ in.Skirt 40–100 cm, pants 90–110 cm, shorts 30–55 cm.Which ease to choose
| Garment | Bust ease | Armhole depth ease |
|---|---|---|
| T-shirt | +3⅛ in8 cm | +⅜ in1 cm |
| Sweatshirt | +3⅞ in10 cm | +¾ in2 cm |
| Hoodie | +4¾ in12 cm | +1 in2.5 cm |
How the kids' block is drafted
Choose a height and the tool fills in the child's measurements for that height from standard body measurements tables: bust and hip, back waist length and garment length. If the child is slimmer or bigger than their peers, adjust the bust — neck, shoulder width and armhole depth still come from the height. Up to age 9–10, boys' and girls' figures are almost the same, so the pattern fits both.
The kids' block differs from the adult one. The neckline is wider by ⅜ in1 cm on each side so the head fits through: a child's head is large relative to the neck. Children's shoulders are wider relative to the bust, so the shoulder slope is smaller, and for little ones it gets even smaller in proportion to height. The sleeve cap is low, and the cap itself is ⅝ in1.5 cm shorter than the armhole — knit fabric eases in when set in; sleeve length and hem width are filled in by height on the "Sleeve" tab.
We checked the draft against proven commercial patterns for the same style: the key measurements match.
Sleeve and hood
Draft the block, then go to the "Sleeve" tab: the tool takes this block's armhole and makes the cap lower for a dropped shoulder. On the "Hood" tab, the hood neckline is taken from this block's neckline.
How to print and tape
Download the PDF on Letter or A4 sheets and print at 100%, without "fit to page". The first sheet has the test square: measure it with a ruler. Tape the sheets with an overlap along the ⅜ in1 cm strips; sheet numbers and the assembly guide are on the first page. For a copy shop or plotter, choose "One-sheet PDF".
What you get
The sweatshirt front and back on the fold at full size: armhole notches for the sleeve and a notch at the waistline, grainline, seam allowances and hem allowance.
FAQ
How do I make it room to grow?
Choose a height one size up (by 2⅜ in6 cm), but keep the garment and sleeve length from your own height, or turn up the sleeve hem. That way the sweatshirt is roomier but not too long.
What if the child is between heights?
Choose the next height up and adjust the bust if you know it. Neck, shoulder and armhole measurements will then have a little extra room, and you can shorten the garment length by ⅜–¾ in1–2 cm.